The additional items from the sediment transport simulation to be saved in the result files are selected here. Some items may be irrelevant for some simulations, for instance for some layers layouts, and may therefore not be saved even when selected.
Note that the ST numerical scheme is different from the staggered HD numerical scheme and results from ST simulation is therefore only available at water level calculation points in the HD model.
Bed level change
Bed level change.
Total shear stress
Total shear stress.
Skin shear stress
Skin shear stress.
d50
d50 grain diameter.
d90
d90 grain diameter.
Geometric mean diameter
Geometric mean diameter.
The following items provide the summed values from all fractions.
Bed load
Total bed load for all fractions.
Suspended load
Total suspended load fractions.
Total load
Total load (sum of Bed load and Suspended load).
Concentration
Sediment concentration.
Total layer thickness
Total layer thickness (sum of Active and Passive layers).
Layer thicknesses (all layers)
Active layer thickness and Passive layer thickness saved separately.
The following items provide results for each fraction separately.
Fractional thickness
Fractional thickness for both active and passive layers.
Fractional mass
Fractional mass for both active and passive layers.
Active mass
Fractional mass for the active layer only.
Passive mass
Fractional mass for the passive layer only.
Surface distribution
Surface distribution for active and passive layers.
Sediment concentration
Sediment concentration for active and passive layers.
Bed load
Fractional Bed load for active and passive layers.
Suspended load
Fractional Suspended load for active and passive layers.
Total load
Total load (bed + suspended load) for active and passive layers.
Substrate (each layer and fraction)
The following items provide results for each fraction and each layer separately.
Fractional thickness for each substrate layer
Fractional thickness.
Fractional mass for each substrate layer
Fractional Mass.