IOutlet Interface |
An Outlet is a volume free node where water flows out of the system.
An outlet is the only type of open boundary that does not need a boundary condition
An outlet can have a boundary condition (water level/QH), in which case the water can also flow into the system.
The IOutlet extends the IVolumeNode, though it can also be used outside a sewer system, in which case the GroundLevel is set to the BottomLevel. The rest of the IVolumeNode properties are not valid for a non-sewer outlet.
Namespace: DHI.Mike1D.NetworkDataAccess
Assembly: DHI.Mike1D.NetworkDataAccess (in DHI.Mike1D.NetworkDataAccess.dll) Version: 16.0.0.0 (11.1.1.1111)
SyntaxC#
public interface IOutlet : INode, IComparable<INode>
The IOutlet type exposes the following members.
Properties| Name | Description | |
|---|---|---|
 | GroundLevel |
Level of ground at the node.
Unit: [m]
Default: 0
|
| HeadLossParameterSet |
Head loss parameters. Can be null
(Inherited from INode.) |
| Id |
Node identification string
(Inherited from INode.) |
| PressureReachNodeType |
Type of pressure reach node, used for pressurized sections of the network.
Default: None
(Inherited from INode.) |
| PressureReachTailCrestLevel |
Minimum water level in the outflow from pressurized sections, and hence also minimum water level in the pressurized section
(Inherited from INode.)Only applicable when PressureReachNodeType is Tail. Unit: [m] |
| XCoordinate |
X-coordinate of the node
(Inherited from INode.) |
| YCoordinate |
Y-coordinate of the node
(Inherited from INode.) |
Methods| Name | Description | |
|---|---|---|
 | CompareTo | Compares the current object with another object of the same type. (Inherited from IComparableINode.) |
| Validate |
Validate the node
(Inherited from INode.) |
See Also