LIDLayerStorage Class

Storage LID layer

Inheritance Hierarchy

SystemObject
DHI.Mike1D.RainfallRunoffModule.LIDLIDLayerStorage

Namespace: DHI.Mike1D.RainfallRunoffModule.LID
Assembly: DHI.Mike1D.RainfallRunoffModule (in DHI.Mike1D.RainfallRunoffModule.dll) Version: 16.0.0.0 (11.1.1.1111)

Syntax

Copy

public class LIDLayerStorage

The LIDLayerStorage type exposes the following members.

Constructors

	Name	Description
	LIDLayerStorage	Initializes a new instance of the LIDLayerStorage class

Top

Properties

	Name	Description
	CloggingFactor	Volume of voids that are clogged due to fine particles accumulation. Use a value of 0 to ignore clogging
	Conductivity	Infiltration rate, The maximum rate at which water can flow out the bottom of the storage. In case a CloggingFactor has been enabled, the rate declines over time. Default value: 0. Unit: [m/s].
	Depth	Depth of storage [m]. State variable
	Drain	Drain flux from storage [m/s].
	DrainageBase	Drainage capacity is a rate per area [m/s] and can be scaled by different areas.
	DrainageCapacity	Capacity for drain [m/s] The actual drain flow depends on the Area. If DrainageExponent > 0, then drain flow also depends on the head. Default value: 0. Unit: [meter/second].
	DrainageExponent	Exponent for drain flow calculations [-] The drain capacity flow is multiplied with Copy Math.Pow(head, DrainageExponent) If DrainageExponent is zero, then drain flow is constant and independent on the head. Default value: 0. Unit: [-].
	DrainageOffset	Offset where drainage starts. Height of any underdrain piping above the bottom of the storage Default value: 0. Unit: [meter].
	Evap	Evaporation flux from storage [m/s].
	Height	Height of storage layer Default value: 0. Unit: [meter].
	Infil	Infiltration flux from storage [m/s].
	Porosity	Storage porosity; void volume fraction of total volume.
	Volume	Volume of water per area [m] contained in storage

Top

Methods

	Name	Description
	Equals	Determines whether the specified object is equal to the current object. (Inherited from Object.)
	Finalize	Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection. (Inherited from Object.)
	GetHashCode	Serves as a hash function for a particular type. (Inherited from Object.)
	GetStorageDrainRate	computes underdrain flow rate in a LID's storage layer.
	GetStorageInfilRate	native soil beneath a LID.
	GetType	Gets the Type of the current instance. (Inherited from Object.)
	GetVolume	Volume of water per area [m] contained in storage for a given depth
	Limit	Limit state variables to allowed range, between zero and Height
	MemberwiseClone	Creates a shallow copy of the current Object. (Inherited from Object.)
	ToString	Returns a string that represents the current object. (Inherited from Object.)
	Validate	Validate surface parameters

Top

Reference

DHI.Mike1D.RainfallRunoffModule.LID Namespace