The MIKE SHE Reference Guide   

Reference Guide Overview

The Reference Guide includes detailed descriptions of the tools and dia­logues that you are likely to encounter as you develop a MIKE SHE model. If you click F1 in any MIKE SHE dialogue, you will land in one of the sections of this manual. Likewise, if you click F1 in any MIKE 11 or other MIKE Zero dia­logue, you will land in an appropriate section of the on-line help.

The first part of the document follows the general organization of the MIKE SHE user interface. These sections are the places you land, when you press the F1 key in MIKE SHE and include the

·         Setup Data Tab (V1 p. 175)

·         Preprocessed Data Tab (V1 p. 357), and

·         Results Tab (V1 p. 363)

This is followed by detailed descriptions of the various MIKE SHE specific editors, including the

·         Well editor (V1 p. 397)

·         Vegetation Properties Editor (V1 p. 403)

·         UZ Soil Properties Editor (V1 p. 409), and

·         Water Balance Editor (V1 p. 419)

In turn, this is followed by the MIKE SHE Reference Guide. This include both Technical Reference sections and detailed User Guides sections. For the Water Movement module, this includes a

·         Evapotranspiration - Technical Reference (V1 p. 425)

·         Working with Evapotranspiration - User Guide (V1 p. 445)

·         Snow Melt - Technical Reference (V1 p. 449)

·         Working with Freezing and Melting - User Guide (V1 p. 455)

·         Overland Flow - Technical Reference (V1 p. 459),

·         Working with Overland Flow and Ponding- User Guide (V1 p. 483)

·         Channel Flow - Technical Reference (V1 p. 517)

·         Working with Rivers and Streams - User Guide (V1 p. 519)

·         Unsaturated Zone - Technical Reference (V1 p. 549)

·         Working with Unsaturated Flow - User Guide (V1 p. 581)

·         Saturated Flow - Technical Reference (V1 p. 597)

·         Working with Groundwater - User Guide (V1 p. 627), and

·         Using MIKE SHE with MIKE URBAN (V1 p. 647)

For the Water Quality module, this includes

·         the Advection Dispersion - Reference (V1 p. 659),

·         the Reactive Transport - Reference (V1 p. 685), and

·         the Particle Tracking-Reference (V1 p. 723).

Finally, there is a chapter that describes all the Extra Parameter options for MIKE SHE that allow you to control model features that are not yet included in the user interface.

·         Extra Parameters (V1 p. 733)

There is a separate document for the MIKE SHE Toolbox.